INSTA360 Ace Pro 2 Dive Case

INSTA360 Ace Pro 2 Dive Case

Optimal image quality thanks to high-quality glass lens

The better transparency than plastic lenses ensures that your images remain clear and detailed. The hydrophobic and oil-resistant coating minimizes light reflections and deformation

. Safe and secure

User-friendly, waterproof dive case with robust buckle closure to keep your camera safe at all times.

Guaranteed optimal performance

Designed and tested to protect the Ace Pro and optimize image quality underwater

. Notes

Please update the camera firmware to the latest version before using the housing. Improper care may affect the performance of the product. Each time before inserting the camera into the housing, you should close the housing (without the camera inserted) and submerge it underwater to check for leaks. Before closing the housing, make sure that there are no foreign particles (dirt, dust, sand, etc.) on the parts of the housing that come into contact with the rubber seal. Make sure that the rubber seal is positioned correctly and is neither broken nor twisted

. The immersion housing is not shockproof. Strong vibrations, shocks or pressure exerted on the product can lead to damage, failure or reduced watertightness. The maximum recommended immersion height is 2 meters above the water level when you jump into the water. The submersible housing protects the camera if it falls from a maximum height of 1 meter onto solid ground. Do not open the housing while it is wet.

After using the product in the sea, remove the camera and make sure that the housing is firmly closed. Place the housing in fresh water for 5 - 10 minutes and then rinse it carefully with tap water.
Do not store the housing in a hot or humid environment, such as a heated car. Do not clean the immersion housing with soap, neutral detergents, organic solvents or alcohol-based cleaning products, as this may impair the water resistance.