HASSELBLAD X Extension Tube 9mm

HASSELBLAD X Extension Tube 9mm

Mount the extension tube between the lens and the camera to take macro shots. Up to two
extension tubes can be added at the same time to further shorten the focus distance. When the lens is mounted with the extension ring, it is only used for macro shots and cannot successfully focus on the subject from a distance.

Extension ring and X-Converter

When used with the XCD 2.8/135 and the
X-Converter 1.7, the extension rings should be mounted between the
camera body and the converter.
When using the extension ring, the image quality and the actual aperture of the lens may be impaired.

By increasing the distance between the lens and the image sensor, the minimum focus distance of the XCD lens is reduced, which improves the close-up ability and brings fine details closer.*

The Hasselblad X extension ring (9 mm) can be used individually or stacked in pairs. When stacked, the effect is doubled, expanding the close-up capabilities of the XCD series lenses. With a resolution of 100 megapixels, every detail is vividly captured.

The Hasselblad X extension ring (9 mm) embodies the Hasselblad design philosophy - simple yet exquisite. With a length of 9 mm and a weight of 89 g, it is lightweight, portable and easy to install. Once attached, the lens' autofocus remains fast and precise. Whether it's the natural wonders experienced while traveling or the fine details of daily life, they can all be captured with high clarity

*When using the extension ring, the optical performance of the lens may be slightly reduced and infinity focus cannot be achieved. The focus range is limited to close distances.

Compatibility

Compatible lenses - Hasselblad XCD lenses**
Compatible cameras - Hasselblad X System and Hasselblad 907X cameras***

*When using the extension ring, the optical performance of the lens may be slightly reduced and infinity focus cannot be achieved. The focus range is limited to short distances

**Before using the extension ring, update the firmware of the XCD lens to the latest version

***X2D 100C / 907X & CFV 100C require a firmware upgrade to version 4.0.0 before use.