Rode Wireless Go II + Lavalier GO Lavalier Microphone

Rode Wireless Go II

The Wireless GO II is an extremely versatile wireless microphone system that, with two transmitter modules and a 2-channel receiver, is ideal for interviews and many other occasions when two sound sources need to be recorded simultaneously and separately.

Future-proof
Firmware updates are also possible via the USB-C socket using the "RØDE Central" software. The transmitters can already be equipped with an on-board recording function, for example. Here, up to 24 hours of audio are recorded directly in the transmitter module, optionally also with Safety Channel, whereby the recording is 20 dB quieter on one channel. If a surprisingly loud signal causes an overload, the undistorted Safety Channel can be used elegantly in post production.

The TX transmitter modules
Each of the two 4x4 cm small transmitter modules already has a high-quality condenser microphone built in, which has been optimally tuned for voice transmission. The clamp on the back allows the transmitter module to be easily attached to clothing - ideally on the collar, lapel or at chest level.

The RX receiver module
The receiver module can be conveniently attached to the hot shoe of a camera, and the audio connection is then made via the 3.5 mm TRS jack on the side. However, you can also use the USB-C jack and output the signal digitally.

Rode Lavalier GO Lavalier Microphone.

Lavalier GO is a portable microphone for professional use suitable for a variety of applications. The 3.5mm jack plug is the perfect connection with the Rode Wireless GO and most recording devices with a 3.5 mm jack microphone input.

Lavalier GO has excellent performance in any broadcast application. With its discrete 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to talent placement, allowing for greater flexibility in fast-paced situations.

• Acoustic principle: Permanently polarized condenser
• Polar pattern: Omnidirectional
• Frequency range: 20Hz - 20kHz
• Output impedance: 3 kΩ typical
• Signal to noise ratio: 67 dB
• Equivalent noise: 27 dB typical
• Maximum sound pressure: 110 dB
• Sensitivity: -35 dB (17.8 mV at 94 dB SPL)
• Dynamic range: 83dB typical
• Power requirements: TRS power supply (2.7 V)
• Output connection: Gold-plated jack plug